Low Temperature Oxidation Experiments and Kinetics Model of Heavy Oil
Air injection is an effective technique for improved oil recovery. For a typical heavy oil sample, the effects of temperature on the oxidation characteristics were studied by low temperature oxidation (LTO) experiments. Kinetic parameters such as activation energy, frequency factor (pre-exponential factor) and reaction order are determined by using Arrhenius Equation. These parameters provide a theoretical basis for numerical simulation of LTO taking place during air injection in heavy oil reservoirs. The results of LTO experiments show that heavy oil has good low temperature oxidation properties and LTO reaction rate is mainly related to temperature, oxygen partial pressure and properties of crude oil. In the experimental temperature range, the oxidation reaction can effectively consume oxygen and at the same time produce large amount of CO2.
Key words: Air injection; Low temperature oxidation; Kinetics model (70-150 oC)
 Greaves, M., Ren, S. R., & Rathbone, R. R., et al. (2000). Improved Residual Light Oil Recovery by Air Injection (LTO Process). Journal of Canadian Petroleum Technology, 39(1), 57-61.
 Greaves, M., Ren, S.R., & Xia, T.X. (1999). New Air Injection Technology for IOR Operations in Light and Heavy Oil Reservoirs. SPE Asia Pacific Improved Oil Recovery Conference, 25-26 October 1999, Kuala Lumpur, Malaysia.
 Yu, H.M., Ren, S.R., & Wang, J. X., et al. (2008). Numerical Simulation Study on Enhanced Oil Recovery by Air Injection Process in Shengli Oilfield. Oil Drilling & Production Technology, 30(3), 105-109.
 Yu, H.M., Yang, B.Q., & Xu, G.R., et al. (2008). Air Foam Injection for IOR: From Laboratory to Field Implementation in Zhongyuan Oilfield China. SPE/DOE Symposium on Improved Oil Recovery, 20-23 April 2008, Tulsa, Oklahoma, USA.
 Zhao, B., Gao, H.T., & Yang, W.D. (2005). Potentials of Improved Oil Recovery by Air Injection in Zhongyuan Oilfield. Oil-Gasfield Surface Engineering, 24(5), 22-23.
 Adegbesan, K. O., Donnelly, J. K., & Moore, R. G., et al. (1984). LTO Kinetic Parameters for In-Situ Combustion: Numerical Simulation. SPE Res., 2(4), 573-582.
 Babu, D. R., & Cormack, D. E. (1983). Low Temperature Oxidation of Athabasca Bitumen. Can. J. Chem., 61, 575-580.
 Ren, S. R., Greaves, M., & Rathbone, R. R. (1999). Oxidation Kinetics of North Sea Light Crude Oils at Reservoir Temperature. Chemical Engineering Research and Design, 77(A5), 385-394.
 Yu, H.M., Ren, S.R., Zuo, J.L., & Wang, R.H. et al. (2009). Experiment of Improved Oil Recovery by Air Foam Injection Low Temperature Oxidation Process. Journal of China University of Petroleum, 33(2), 94-98.
 Zhang, X.B. (2006). Applied Research of Steam-Carbon Dioxide-Auxiliary Agent Huff and Puff Technology. Acta Petrolei Sinica, 27(2), 80-84.
 Chen, Z.Y., Yu, H.M., Zhang, F., & Ren, S.R. (2012). Low Temperature Oxidation Kinetics Model and Analysis of Influence Factors in Air Foam Flooding of M15 Block. Science Technology and Engineering, 18(12), 4364-4367.
 Chen, Z.Y., Zhang, F., & Ren, S.R. et al. (2012). Crude Oil Phase Behavior and Its Influence Analysis by Air Injection. Applied Chemical Industry, 41(7), 1147-1154.
- There are currently no refbacks.
If you have already registered in Journal A and plan to submit article(s) to Journal B, please click the button "Authors" on the right side of the journal title in the website: http://www.cscanada.net
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
firstname.lastname@example.org; email@example.com; firstname.lastname@example.org
Copyright © 2010 Canadian Research & Development Center of Sciences and Cultures
Address: 758, 77e AV, Laval, Quebec, H7V 4A8, Canada
Telephone: 1-514-558 6138