The Research and Application of Low Density Cement Slurry System at Low Temperature in Daqing Oilfield

Dongnian YU

Abstract


During long sealing cementing of low temperature shallow gas well in Daqing oilfield, for the low density cement slurry at low temperature, the setting time is longer, gelling strength development is slower, filter loss is greater and the anti-channeling ability is weak. It would make the happening of annular gas channeling and fluid emitting, affect the cement job quality. Low density low temperature anti-channeling cement slurry system was studied with compound early strength agent, polyacrylate polymer latex drop loss of water, dispersed polymer powder anti-channeling agent, improve the comprehensive performance low density cement slurry. Laboratory experiments showed that setting time shortened by 50%, early strength increased by 46%, permeability decreased by 50%, interfacial bond strength increased by 47%, compared with the low density cement and the class G well cement. The application tests in the field were carried out in 18 wells. High-quality rate of well cementing increased by 11.1 percentage points. The incidence rate of fluid emitting is decreased by 1.6%. This cement slurry system can satisfy the requirements of cementing operation. It will improve the cementing quality of long sealing section in a shallow layer in Daqing Oilfield.


Keywords


Low density; Low temperature; The anti-channeling ability; Cement slurry; Cementing quality

Full Text:

PDF

References


Chen, Y., & Su, Q. G. (2005). Experimental study on low temperature fine cement with low density. Natural Gas Industry, 25(12), 74-76.

Guo, J. R. (2009). The distribution rule of shallow gas and analysis to shallow gas blowout and its preventing teehnology in Pytaohua oilfield. Inner Mongolia Petrochemical Industry, (14), 83-86.

Han, D. X. (2007). The distribution regulation of shallow buried gas in south of daqing Changyuan and the prediction studies of formation pressure on its adjusted well site. Northeast Petroleum University.

Jiang, M. F., & Lü, X. J. (2014). Research and application progresses of concrete early strength agent. Bulletin of the Chinese Ceramic Society, 33(10), 2527-2523.

Lü, J. (2003). Preparation of the water-borne,low-temperature curable polyacrylate latex and its application in the textile. Donghua University.

Luo, Y., Song, W. Y., Bu, Y. H., & Wang, M. J. (2012). Improvement on the cementing quality assessment method for light-weight cement sheaths. Natural Gas Industry, 32(10), 59-62.

Ma, S. M. (2013). Low temperature anti channeling cement slurry system of field application.China Petroleum and Chemical Standard and Quality, 10, 234.

Sun, X. H., Leng, X., & Guo, Y. R., et al. (2009). Studies of a high strength low density cement slurry system. Drilling Fluid & Completion Fluid, 26(1), 44-46.

Yang, Z. G., Yang, X. T., & Zhang, L., et al. (2010). Deterioration mechanism and improvement of weak interface in cementing. Drilling Fluid & Completion Fluid, 27(3), 79-83.

Zhao, S. F., & Sun, Y. (2014). Disperse powder and mineral admixture mixed experiment on the influence of bonding mortar performance research. China Concrete and Cement Products, (8), 29-33.




DOI: http://dx.doi.org/10.3968/9885

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Dongnian Yu

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Share us to:   


Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures