Research on Sealing Technology of Waste Well Cement Slurry

Yongsheng LIU

Abstract


With oilfield development, a large number of injection-production old wells due to mining for a long time have entered into the phase of scrap and have a bad effect on the oil field development and production, how to seal the abandoned well, which is not affected by other production well, we need to focus on. In this paper, by means of numerical simulation, the variation law of the mud diffusion distance in different construction conditions is simulated, and the corresponding cement slurry sealing parameters are selected to improve the sealing effect of the abandoned well.


Keywords


Cement slurry sealing; Rheological property; Diffusion velocity; Sealing radius

Full Text:

PDF

References


[1] Hao, Y. Z. (2000). Determination and analysis of main rheological parameters of cement paste. Water Conservancy and Hydropower Scientific and Technological Progress, (40), 32-34.

[2] Sun, B. H., Gao, Y. H., & Liu, D. Q. (2007). Numerical simulation of annular flow and its flow degeneration of cement slurry. Water Dynamics Research and Development, 23(3), 317-324.

[3] Zheng, Y. G., & Hao, J. F. (1995).Research on the movement law of cement slurry displacing mud in cementing slurry. Western Exploration Engineering, 7(3), 29-31.

[4] Wang, J. Y., Li, X. Z., & Wang, L. Q. (2005). Development and application of the technology of filling and sealing of the discarded well. Petroleum Machinery, 33(7), 55-58.

[5] Xu, B. H., Guo, X. Y., & Liu, C. J. (1996). Development and application of cement injection simulation system. Journal of Southwest Petroleum University, (3), 38-43.

[6] Mack, D. J., & Kendrick, D. (2003, September). Low density, lost circulation control slurry utilizing a unique lcm allows successful, single-stage cementing of extremely long production intervals in the Appalachian basin. Paper presented at SPE Eastern Regional Meeting, Pittsburgh, Pennsylvania, USA.

[7] Jones, P. H., & Berdine, D. (1940, January). Oil-well cementing: Factors influencing bond between cementand formation. Paper presented at Drilling and Production Practice, New York, USA.




DOI: http://dx.doi.org/10.3968/7922

Refbacks

  • There are currently no refbacks.


Copyright (c) 2015 Advances in Petroleum Exploration and Development



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures