The Application of Performed Particle Gel for Water Shutoff and Flooding in Severe Heterogeneous Reservoir

QIU Weiqing

Abstract


The success of in-depth fluid diversion and enhancement of the pay zones production are hot issues in long term water flooded oilfields. However, the effect of most chemical-based water cut technologies and conformance-control treatments on fluid profile conformance are normally useful surround near wellbore zones. In addition, chemical particles can probably result in formation damage on low permeable parts of pay zone and the other potential drawbacks. Comparing to general chemical agents such as cross linker, polymer gel, foam fluid and so forth. A water shutoff plugging agent called PPG (Performed Particle Gel) show its advantage in strength-control, size-control and environment-friendly. PPG is a type of gel and synthesized with aqueous, acrylamide, cross linker and the other additives, which can be prepared at surface rather than in the wellbore, thus it is not so sensitive to high temperature and high salinity. A series of studies and field experiments through core flooding were investigated in this paper. The results indicate PPG can significantly achieve in-depth conformance in sever heterogeneous formation and can be widely applied in mature water flooded oil fields.
Key words: Heterogeneous; Performed particle gel; Water shutoff; Recovery


Keywords


Heterogeneous; Performed particle gel; Water shutoff; Recovery

Full Text:

PDF

References


[1] Bai, B. J., Li, L. X., Liu, Y. Z., Liu, H., Wang, Z. G., & You, C. M. (2007). Preformed particle gel for conformance control: factors affecting its properties and applications. SPE Reservoir Evaluation & Engineering, 10(2), 415-422.

[2] Chauveteau, G., Omari, A., Tabary, R., Renard, M., & Rose, J. (2000, April). Controlling gelation time and microgel size for water shutoff. Paper presented at SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma.

[3] Wang, D., Zhao, L., & Cheng, J. (2003, October). Actual field data show that production costs of polymer flooding can be lower than water flooding. Paper presented at the SPE International Improved Oil Recovery Conference in Asia Pacific held in Kuala Lumpur, Malaysia.

[4] Smith, J. E. (1989). The transition pressure: A quick method for quantifying polyacrylamide gel strength. Paper presented at the SPE International Symposium on Oilfield Chemistry in Houston, TX, USA.

[5] Bo, P. (1998). Determination of the structure of polyacrylamride/alaminam ciIrate colloidal dispersion gel system. Chinese Journal of Chemical, 6(2), 171-173.

[6] Sydansk, R. D., & Southwell, G. P. (2000). More than 12 years’ experience with a successful conformance-control polymer-gel technology, SPE production & facilities, 15(4), 270-278.

[7] Seright, R. S., & Liang, J. (1994, April). A survey of field applications of gel treatments for water shutoff. Paper presented at SPE Latin America/Caribbean Petroleum Engineering Conference, Buenos Aires, Argentina.

[8] Gao, S. T., Li, H. B., Yang, Z. Y., Pitts, M. J., Surkalo, H., & Wyatt, K. (1996). Alkaline/surfactant/polymer pilot performance of the West Central Saertu, Daqing oil field. SPE Reservoir Engineering, 11(3), 181-188.

[9] Natarajan, D. (1998). Control of in-situ gelation for HPAM-Chromium acetate systems. Paper presented at the Improved Oil Recovery Symposium, Tulsa. OK.

[10] Song, W., Yang, C., & Han, D. (1995, November). Alkaline-surfactant-polymer combination flooding for improving recovery of the oil with high acid value. Paper presented at the International Meeting on Petroleum Engineering held in Beijing, China.




DOI: http://dx.doi.org/10.3968/6609

Refbacks

  • There are currently no refbacks.


Copyright (c)




Share us to:   


Reminder

 We are currently accepting submissions via email only.

The registration and online submission functions have been disabled.

Please send your manuscripts to aped@cscanada.net,or  aped@cscanada.org  for consideration. We look forward to receiving your work.

 

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures