Optimizing Technology of Drilling Fluid for Improving Logging Success Rate of Central Area of Junggar Basin
Abstract
The characters of deep wells in the central area of Junggar Basin include the burial depth of the reservoir is deep, the temperature of borehole bottom is high and the middle and the lower formations are developed with hard and brittle mudstones. The Toutunhe Formation and the Badaowan Formation are full of micro fissures which frequently caused sloughing, borehole wall collapse to happen. The average well diameter expansion rate exceeds 15% and logging instruments got blocked frequently. Based on the analyses of mineral composition and physical and chemical properties, Optimized drilling fluid formula was presented after evaluation of different size plugging agents and lubricants in order to heighten tight plugging performance. The result of Pressure Transmission experiment indicates that after optimization drilling fluid can prevent or stay the pressure transmission in mudstone effectively. The formula has been applied in Well Cheng 6 and the high-temperature and high-pressure filtration loss was only 8.0mL, the average well diameter expansion rate was less than 5%. The logging success rate reached 100%, exceeding the research target of 80%. Using this formula, the goals of stabilizing borehole wall and enhancing logging success rate have been achieved.
Keywords
Full Text:
PDFReferences
Chang, H. B., Zheng, Z. G. (2012). Optimized and fast drilling used for block 1 of central Junggar basin. Natural Gas Technology and Economy, (6), 32-34.
Qiu, C. Y., Qin, T., & Wang, B. T. (2015). Drilling fluid technology on borehole stability in Junggar Jurassic formation. Drilling and Production Technology, (5), 77-80.
Xu, T. T. (1997). On wellbore stability technology. Drilling Fluid & Completion Fluid, 14(4), 36-39.
Sun, L. H. (2009). Research on borehole stability in Junggar Basin. China University of Petroleum Master Degree Thesis.
Xu, L., Deng, M. Y., & Guo, Y. J. (2016). Research on application of nano-plugging agent in drilling fluid. Applied Chemical Industry, 45(4), 742-745.
He, Z. K. (2013). Strong inhibiton and sealing water-based drilling fluid technology for deviated section of shale horizontal wells. Drilling Fluid & Completion Fluid, 30(2), 43-46.
Zhao, L., Guo Yanhui，LI Jing, et a1. (2011). Application of organic KCl high-density drilling fluid technology in well Jinhe-1. Drilling Fluid & Completion Fluid, 28(1), 78-80.
DOI: http://dx.doi.org/10.3968/12557
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Author(s)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Share us to: 
Reminder
We are currently accepting submissions via email only.
The registration and online submission functions have been disabled.
Please send your manuscripts to aped@cscanada.net，or aped@cscanada.org for consideration. We look forward to receiving your work.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures 
