Optimizating Drilling Operating Parameters With Real-Time Surveillance and Mitigation System of Downhole Vibration in Deep Wells

Meng CUI, Haige WANG, Jinying ZHAO, Liu CUI, Zhixue CHEN

Abstract


Torsional vibration is the main bottleneck which leads to low efficiency of rock breaking. According to the characteristics of torsional dysfunctions performance, the paper defines three main types of stick-slip, and analyzed the relationship between ROP and energy from bit. Based on Newton’s equations of motion, established frequency domain, single degree of freedom, damped and forced drill string torsional vibration prediction model, with more accuracy for downhole drill string mechanical state description. On this basis, semi-analytical transfer matrix method is adopted to establish drill string response relationship between internal force wave and surface parameters changes in the condition of vibration, which greatly reduce the number of discrete elements and the associated computing time, enabling rapid screening of a large number of design alternatives on a PC. In addition, the response parameters for drillstring stick-slip are integrated into an index (Vibration Strength Estimate, VSE), which is used to quantitatively evaluate downhole stick-slip severity. A three-week pilot test has been conducted in deep wells in Yumen Oilfield in China, with 25% increase of the average ROP and 40% enhancement of the average bit footage compared with offset wells. Validation of field application shows that the downhole torsional vibration evaluation technology is an effective method for further excavate the potential of ROP and reduce drilling cost.

Keywords


Stick-slip; Torsional vibration; Transfer matrix; VSE; Quantitative evaluation

Full Text:

PDF

References


[1] Wang, R., Xue, Q., & Han, L. (2014). Torsional vibration analysis of push-the-bit rotary steerable drilling system. Meccanica, 49(7), 1601-1615.

[2] Teale, R. (1965). The concept of specific energy in rock drilling. International J. Rock MEch. Mining Sci., 2, 57-73.

[3] Dupriest, F. E., Elks Jr., W. C., & Ottesen, S. (2011). Borehole-quality design and practices to maximize drill-rate performance. SPE Drilling & Completion, 26(2), 303-316.

[4] Corporation, H. P. (2014). Chaotic vibration analysis of the bottom rotating drill string. Shock & Vibration, 49(1), 104-111.




DOI: http://dx.doi.org/10.3968/7386

Refbacks

  • There are currently no refbacks.


Copyright (c) 2015




Share us to:   


Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1020 Bouvier Street, Suite 400, Quebec City, Quebec, G2K 0K9, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures