Under the Non-Uniform Ground Stress Condition for Simulating the Casing Deformation

AI Chi, GAO Changlong, YU Miaochuan, YANG Ming

Abstract


To the issue about the casing deformation, the paper main study the casing deformation law under the non-uniform ground stress condition, by the ways that the finite element software. The results of the study shows that under the non-uniform ground stress condition, the casing maximum deformation is parallel to the maximum horizontal stress direction. With the increase of the difference between maximum horizontal stress and minimum horizontal stress, the casing deformation increase gradually. And with the elasticity modulus of rock and the Poisson’s ratio of formation increase, the maximum deformation is lessen. The elasticity modulus of rock have more effect than the Poisson’s ratio of formation. When the elasticity modulus of rock exceed a certain threshold, casing deformation would not be effected by the elasticity modulus of rock.
Key words: Non-uniform ground stress; Casing deformation; The elasticity modulus of rock; The Poisson’s ratio of formation


Keywords


Non-uniform ground stress; Casing deformation; The elasticity modulus of rock; The Poisson’s ratio of formation

Full Text:

PDF

References


[1] Liu, W. Y. (2014). Casing damage mechanism and treatment of thermal horizontal well. Sino-Global Eneregy, (1), 58-61.

[2] Wang, T. T. (2014). A region of western south Daqing oilfield casing damage prevention and control method research. Journal of Yangtze University (Nat. Sci. Edit.), 26, 96-98.

[3] Yang, L. J., Wang, X. M., & Cui, Z. D. (2003). Current and comprehensive regulation measures of casing damage in Jidong oilfield. Oil Drilling &Production Technology, (2), 79-82, 92.

[4] Yan, X. Z., Yang, H. L., & Yang, X. J. (2003). The reason analysis of mudstone creep on casing damage. Drilling &Production Technology, (3), 71-74, 75.

[5] Lian, Z. H., Wang, G., & He, M. Z. (1994). Computer imitation about casing deformation. Oildrilling & Production Technology, (3), 21-30, 106-107.

[6] Lian, Z. H., Zhang, X. P., & Li, B. (1995). Computer slmulation of schemes for perventing casing deformation. Petroleum Machinery, (4), 20-24, 59.

[7] Wang, X. Y., Wang, K. S., & Wang, F. X. (2009). Mechanics analysis of casing deformation under non-uniformin-situ stress and its repair. Oil Field Equipment, (5), 9-14.




DOI: http://dx.doi.org/10.3968/6503

Refbacks

  • There are currently no refbacks.


Copyright (c)




Share us to:   


Reminder

 We are currently accepting submissions via email only.

The registration and online submission functions have been disabled.

Please send your manuscripts to aped@cscanada.net,or  aped@cscanada.org  for consideration. We look forward to receiving your work.

 

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures