Research on One Novel Logging Interpretation Method of CBM Reservoir

Qing FENG, Shengsheng LI, Yanni SUN, Ming ZENG, Xiaonan LI, Xuxing WANG

Abstract


Coalbed methane (CBM) is a kind of natural gas which is stored in the micropores and fractures of the “coal seam” and has not been transported out of the source rock. Conventional logging technology plays an important role in coalbed methane exploration and development. By analyzing the response characteristics of conventional logging of coalbed methane, coal bearing strata are accurately determined. Two methods of statistical model and volume model are established to analyze and calculate industrial components. Based on the study of adsorption isotherm and correlation between logging parameters and coal core gas content, the calculation method of coal seam gas content is determined In practices, the calculation accuracy of industrial components and gas content of coal seam has been significantly improved. Abstract: coalbed methane (CBM) is a kind of natural gas which is stored in the micropores and fractures of “coal seam” and has not been transported out of the source rock. Conventional logging technology plays an important role in coalbed methane exploration and development. By analyzing the response characteristics of conventional logging of coalbed methane, coal bearing strata are accurately determined. Two methods of statistical model and volume model are established to analyze and calculate industrial components. Based on the study of adsorption isotherm and correlation between logging parameters and coal core gas content, the calculation method of coal seam gas content is determined In practice, the calculation accuracy of industrial components and gas content of coal seam has been significantly improved.


Keywords


CBM conventional logging interpretation method; Industrial component gas content

Full Text:

PDF

References


Vinson David S., Blair Neal E., Ritter Daniel J., Martini Anna M., & McIntosh Jennifer C.. (2019). Carbon mass balance, isotopic tracers of biogenic methane, and therole of acetate in coal beds: Powder River Basin (USA). Chemical Geology, 530(C).

Yuan, Y., Shan, Y. S., Tang, Y., & Cao, D. Y. (2020). Coalbed methane enrichment regularity and major control factors in the Xishanyao formation in the western part of the Southern Junggar Basin. Acta Geologica Sinica (English ed.), 94(2).

Lu, G. Q., & Ma, S. X. (2020). Experimental study on static characteristics of turbocharged internal combustion engine with low CBM components. Journal of Physics: Conference Series, 1578(1).

Zhu, S. J., Zhou, F. B., Kang, J. H., Wang, Y. P., Li, H. J., & Li, G. H. (2020). Laboratory characterization of coal P-wave velocity variation during adsorption of methane under tri-axial stress condition. Fuel, 272.

Zhu, H. Y., Qi, Y. G., ,Zhang, F. N., Song, Y. F., Liang, L., & Zhang, J. (2020). Calculation method of production pressure drop based on BP neural network velocity pipe string production in CBM wells. IOP Conference Series: Earth and Environmental Science, 619(1).

Yuan, Y., Shan Y. S., Tang, Y., & Cao, D. Y. (2020). Coalbed methane enrichment regularity and major control factors in the Xishanyao formation in the western part of the Southern Junggar Basin. Acta Geologica Sinica (English Edition), 94(2).

Peter, W. (2020). The quantification and interpretation of Ceramic Building Material (CBM) assemblages in Britain. Britannia, 51(19).

Liu, L. L., Cui, Z. H., Wang, J. J., Xia, Z. H., & Peng, X. Q. (2020). Study and application of a new method for predicting the production of low rank CBM wells. Journal of Physics, Conference series, 1592(1).

Yu, Y. J., & Wang, Y. H. (2020). Characteristics of low-rank coal reservoir and exploration potential in Junggar Basin: new frontier of low-rank CBM exploration in China. Journal of Petroleum Exploration and Production Technology, 10(prepublish).

Singhal, V., Chattopadhyay, S., & Friese, V. (2020). Investigation of heterogeneous computing platforms for real-time data analysis in the CBM experiment. Computer Physics Communications, 253.

Li, Q. X., Xu, J., Peng, S. J., Yan, F. Z., Zhang, C. L., & Han, E. D. (2020). Different adsorbed gas effects on the reservoir parameters and production in coalbed methane extraction by multibranch horizontal wells. Energy Science & Engineering, 8(4).

Lu, G. Q., & Ma, S. X. (2020). Experimental study on static characteristics of turbocharged internal combustion engine with low CBM components. Journal of Physics: Conference Series, 1578(1).

Zhu, S. J., Zhou, F. B., Kang, J. H., Wang, Y. P., Li, H. J., & Li, G. H. (2020). Laboratory characterization of coal P-wave velocity variation during adsorption of methane under tri-axial stress condition. Fuel, 272.




DOI: http://dx.doi.org/10.3968/12102

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Qing FENG

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Share us to:   


Reminder

 We are currently accepting submissions via email only.

The registration and online submission functions have been disabled.

Please send your manuscripts to aped@cscanada.net,or  aped@cscanada.org  for consideration. We look forward to receiving your work.

 

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures